InfraCal Biodiesel Blend Analyzer Ordering Information
Part No.
Description
405-2013
InfraCal Biodiesel Blend Analyzer, Model HATR-T2B for percent Biodiesel (FAME) Blend in Diesel Measurements. Complete with HATR-T2B Trough Sample Stage with built-in Zinc Selenide ATR crystal, Power Supply and Instruction Manual.
Accessories
405-0018
InfraLog Serial Printer Prints calibration and measurement data, complete with sequence number, date and time. Includes all required cables.
403-0013
Carrying Case with pre-diced pluck foam. 18.5" x 14.6" x 8", 8 lbs.
403-0003
External 12v Battery Pack with 120v/60Hz charger (for use in North America). Includes carrying case with shoulder strap and cigarette lighter adapter cable for connection to analyzer. Provides 16 hours of continuous operation.
400-1020
RS 232 Cable
Calibration Options
403-1024
10 Point Calibration Standard Set ranging from 0 - 100% biodiesel in diesel fuel prepared by a certified laboratory. Each vial contains 20 ml of standard, good for a minimum of 15 tests; 6 month shelf life.
403-1050
10 Point Calibration Standard Set ranging from 0 - 30% biodiesel in diesel fuel prepared by a certified laboratory. Each vial contains 20 ml of standard, good for a minimum of 15 tests; 6 month shelf life.
403-1028
Non-Certified Factory Biodiesel Calibration for the InfraCal Biodiesel Blend Analyzer, Model HATR-T2B. A non-certified 10 point factory calibration for measuring the blend of biodiesel in diesel with the certified standards, P/N 403-1050. The calibration range is 0 - 30% biodiesel.
403-1056
Non-Certified Factory Biodiesel Calibration for the InfraCal Biodiesel Blend Analyzer, Model HATR-T2B. A non-certified 10 point factory calibration for measuring the blend of biodiesel in diesel with the certified standards, P/N 403-1024. The calibration range is 0 - 100% biodiesel.
Jumi is working but there is nothing to be shown. Write the code and/or specify the nonempty source of the code.
