Several calibration options are available for the Biodiesel Blend Analyzer:
Customer prepared standards for biodiesel calibration as described in the InfraCal Biodiesel Blend Analyzer User's Guide
Packaged biodiesel calibration standards available for purchase from Wilks Enterprise (ordering information is provided below)
Pre-calibration by Wilks Enterprise (non-certified factory biodiesel blend calibration, as described below)
Standards
Standards can be made gravimetrically or volumetrically as described in the manual. Pre-packaged biodiesel calibration standards prepared by a certified laboratory are available for purchase from Wilks Enterprise. These standards have been prepared by weight (mg/ml) by an ISO-9001 registered laboratory. .
Non-Certified Factory Calibration
Wilks Enterprise can provide the InfraCal Biodiesel Blend Analyzer with a non-certified 6-point factory calibration using the biodiesel blend calibration standards that we have available for sale. Please contact Wilks Enterprise Inc. for pricing.
Part Number
Description
403-1024
10 Point Biodiesel Calibration Standard Set
Standards range from 0 - 100% biodiesel in diesel fuel. Standards are prepared by a certified laboratory. Each vial contains 20 ml of standard, good for a minimum of 15 tests.
403-1050
10 Point Biodiesel Calibration Standard Set
Standards range from 0 - 30% biodiesel in diesel fuel. Standards are prepared by a certified laboratory. Each vial contains 20 ml of standard, good for a minimum of 15 tests.
403-1028
Non-Certified Factory Calibration for the InfraCal Biodiesel Blend Analyzer Non-certified 10 point factory calibration for biodiesel in diesel with certified calibration standards, P/N 403-1050. The calibration range is 0 - 30% biodiesel.
403-1056
Non-Certified Factory Calibration for the InfraCal Biodiesel Blend Analyzer Non-certified 10 point factory calibration for biodiesel in diesel with certified calibration standards, P/N 403-1024. The calibration range is 0 - 100% biodiesel.
Jumi is working but there is nothing to be shown. Write the code and/or specify the nonempty source of the code.
